Remote Programming - GE KTD-405 User Manual

34 KTD-405/KTD-405A/KTD-405-2D Controller Keypad
User Manual

Remote programming

At the ENTER PROGRAMMING CODE menu, press 9-5-1-seq to display the REMOTE PROGRAMMING
menu, which allows you to program devices such as cameras and VCRs, as shown in the tree in Figure 51.
Figure 51. Remote programming menu tree
1=SWITCHER/MPLX
2=ALARMS
3-CAMERA
Standard Digiplex mode
Zone mode
A few things to note about your choices within this menu tree:
• You must select the zone before entering programming mode.
• Pressing 3 in standard Digiplex mode prompts you to enter a camera site number.
• Pressing 3 in zone mode prompts you to enter a camera number in the current zone:
Note: Supervisors may disable remote programming.
1=440 2=CALIBUR
3=340/348 BACK
ENTER MONITOR
NUMBER:
ENTER CALIBUR
ADDRESS:
ENTER MONITOR
NUMBER:
SEE MONITOR FOR
MENUS
ENTER CAMERA SITE
NUMBER___ BACK
ENTER ZONE XCAMERA
NUMBER__ BACK
SEE MONITOR FOR
MENUS
SEE MONITOR FOR
MENUS
SEE MONITOR FOR
MENUS
SEE MONITOR FOR
MENUS
SEE MONITOR FOR
MENUS