Removing Rear Wheel; Installing The Rear Wheel - BMW S 1000 RR Rider's Manual

Brake caliper on fork leg
30 Nm
Insert the wheel-speed sensor
into the bore and install
screw 1.
Remove the adhesive tape
from the wheel rim.
Operate the brake several
times until the brake pads are
bedded.

Removing rear wheel

Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxili-
ary stand; BMW Motorrad re-
commends the BMW Motorrad
rear-wheel stand.
Installing the rear-wheel stand
( 92).
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Engage first gear.
Remove studs 1 from the rear
wheel, while supporting the
wheel.
Roll the rear wheel out toward
the rear.

Installing the rear wheel

Malfunctions are possible
when the ABS system in-
tervenes if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS system
at the start of this chapter.
7
89
z