Rear-Wheel Stand - BMW S 1000 RR Rider's Manual

Make sure the motorcycle is
7
standing firmly.
92

Rear-wheel stand

Install the rear-wheel
stand
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use basic stand with rear axle
adapter. The basic stand and
its accessory components
are available from your
z
BMW Motorrad authorised
dealer.
Use screws 1 to set the rear-
wheel stand to the desired
height.
Remove retaining disc 2. To
do so, press release button 3.
Push the rear-wheel stand from
the right onto the rear axle.
Push the retaining disc on from
the left, while holding the un-
lock button down.
Hold the motorcycle upright
and at the same time press the