BMW S 1000 RR Rider's Manual page 90

Threaded fasteners not
7
tightened to the specified
torque can work loose or their
88
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
z
Slip spacing bushing 1 into
the wheel hub on the left-hand
side.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel between
the front wheel suspension
(telescopic forks).
Raise the front wheel, insert
quick-release axle 2 and
tighten to specified torque.
Quick-release axle in
telescopic forks
50 Nm
Tighten axle clamping screws 1
to the specified tightening
torque.
Clamp of quick-release
axle
19 Nm
Removing the front-wheel
stand.
OE
without centre stand
Remove the auxiliary stand.
Ease the brake calipers on to
the brake discs.
Install screws 1 and tighten to
the specified tightening torque.