Port Selection - ATEN CS-9134 User Manual

2. Wait 10 seconds, then plug the Master Views back in, starting with the last
station in the chain and working back to the station you originally shut down.
3. After all the Master View' s are up, power On the computers, starting with the
ones attached to the last station in the chain and working back to the station
you originally shut down.

Port Selection

The Master View CS-9134/CS-9138 provides three methods to obtain instant
access to any computer in your installation: Manual; Hotkey; and OSD.
w
Manual
Simply press the appropriate Port Selection Switch on the Master View' s
front panel. After you press the switch, the Selected LED lights to indicate
that the port is currently selected. The OSD (see p. 15) automatically
switches to highlight the computer that you have selected.
Note: 1. On a cascaded installation, you must press the Port Selection
switch on the Master View Station that connects directly to the
computer you want to access.
2. Simultaneously pressing Port Selection buttons 3 and 4 (CS-9134) or
7 and 8 (CS-9138) on the First Stage unit initiates the Quick View
Scan feature in which all the ports currently selected for Quick View
scanning with the OSD' s F4 QV function (see p. 19), are cycled
through. The length of time spent on each port is determined with the
Scan Duration setting under the OSD' s F6 SET function (see p. 20).
w
Hot Key Navigation
Hotkey navigation allows you to conveniently access connected computers
directly from the keyboard, instead of having to manually select them by pressing
Port Selection switches. To select a port with the Hotkey method, do the following:
1. Press [Ctrl]+[Shift]+[Alt] to invoke the hotkey function.
2. Key in the Port ID number (see Port ID Numbering on p. 14), then press
[Enter].
Note: 1. Press the keys in sequence - one key at a time. First [Ctrl], then
[Shift], then [Alt].
2. After invoking the hotkey function with the [Ctrl]+[Shift]+[Alt]
combination, you must key in the Port ID and press [Enter] within 1
second for each keypress.
w
OSD
OSD (On Screen Display), provides a menu driven interface to handle the
switching procedure to provide instant access to any computer on the
installation. OSD operation is discussed in detail beginning on p. 15.
CS-9134 / CS-9138 User Manual 13
2001-05-21