ATEN CS-9134 User Manual page 24

w
F6 SET:
Pressing [F6] brings up the OSD configuration menu. To change a setting:
1. Move the highlight bar to the item you want to change, then press [Enter].
2. On the submenu that appears, an icon of a pointing finger indicates the
currently selected setting. Move the highlight bar to the choice you want
and press [Enter].
An explanation of the settings is given in the table below:
Setting Function
CHANNEL DISPLAY Selects how the Port ID is displayed: the Port Number plus
MODE the Name (PN + NAME); the Port Number alone (PN); or
the Name alone (NAME).
CHANNEL DISPLAY Determines how long a Port ID displays on the monitor after
DURATION a port change has taken place: 3 Seconds; or Always On.
CHANNEL DISPLAY Allows you to position where the Port ID appears on the
POSITION screen. Use the Arrow Keys, Pg Up, Pg Dn, Home, End,
and 5 (on the numeric keypad with Num Lock off), to
position the Port ID display, then press [Enter] to lock the
position and return to the SET submenu.
SCAN DURATION Determines how long the focus dwells on each port as it
cycles through the selected ports in Quick View Scan Mode.
The options are: 3, 5, 10, 15, 20, 30, 40, and 60 seconds.
OSD ACTIVATING Selects which Hotkey activates the OSD function: [Ctrl]
HOTKEY [Ctrl] or [Scroll Lock] [Scroll Lock]. The default is the Ctrl
key combination, but this may conflict with programs
running on the computers, in which case, the Scroll Lock
option should be used.
20 CS-9134 / CS-9138 User Manual
2001-05-21