Table of Contents
Advertisement
TRENDnet User's Guide
Video Tamper
Enable Tamper Detection: Check this box to enable tamper detection. Click Save
to save the settings.
Draw Area: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the tamper
detection. You can setup only one area for tamper
detection. Click Stop Drawing to stop drawing motion
detection areas. The gray block represent the
detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
Enable Tamper Detection: Check this box to enable tamper detection. Click Save
to save the settings.
© Copyright 2014 TRENDnet. All Rights Reserved.
Arming Schedule
Edit:
Click Edit to define when you want the tamper
detection works.
TV‐IP450P
39
Advertisement
Table of Contents
