Basic Settings; Live View - TRENDnet TV-IP450P User Manual

TRENDnet User's Guide
6. Open the browser and login again. Allow the plug‐in from TRENDnet if
prompted. The Live View page will show and begin streaming video.
Basic Settings
Live View
After you log‐in into the camera management page, you'll see the Live View page.
© Copyright 2014 TRENDnet. All Rights Reserved.
Multi‐Language
Snapshot
Zoom
Recording
Video Stream
3D Zoom
2‐way Audio
Full Screen Mode
Status Bar
Change your preferred language anytime
Click this icon to take a video snapshot
Click once to enable zoom. Then, click and drag the area on
the picture to zoom in. Click once on picture for 100%
zoom. Click the icon again to disable zoom. The zoom
function works in full screen mode as well
Click once to start recording. Click it again to stop
recording. The status bar will indicate if it is in recording
state or not
The camera has two video streams: H.264 and MJPEG.
Switch to view the different video streams by clicking this
icon
Click the position of the live video, the corresponding
position will be moved to the center of the live feed. Click
and hold the mouse for a desire portion of the live image,
then that position will be moved to the center of the live
feed
Click to enable 2‐way audio
Click the picture to view in full screen mode. Double click
again or press escape key on your keyboard to exit full
screen mode
The status bar shows the status you are at, including
TV‐IP450P
11