TRENDnet User's Guide
802.1X
Setup 802.1X for remote authentication service.
802.1X Authentication
Enable IEEE 802.1X: Check this box to enable 802.1X authentication
service.
EAPOL version: Extensible Authentication Protocol (EAP) over LAN
(EAPoL). Choose version 1 or 2. This version number
must matches to your 802.1X service EAPOL version.
User Name: Enter the account name.
Password: Enter the password.
Confirm: Enter the password again.
Click Save to save the changes
© Copyright 2014 TRENDnet. All Rights Reserved.
IP Address Filter
Set up a list of clients allow only the clients on the list to access this camera or to reject
clients on the list from access this camera.
IP Address Filter
Enable IP Address Filter:
IP Address Filter Type:
Add:
Modify:
Delete:
Click Save to save the changes
Check this box to enable IP address filtering service.
Choose Forbidden to ban the listed IP addresses or
Allowed to allow listed host to access this camera.
Click Add to add a user account
To modify an entry on the list, highlight the entry by
clicking on it. Then, click the Modify button.
Enter the IP address then click OK.
To delete an entry on the list, highlight the entry by
clicking on it. Then, click Delete.
TV‐IP450P
28