TRENDnet User's Guide
status of motion detection. The motion tracking is
displayed by a green grid. The grid area represents
that the camera detects motion in this area. Click
Save to save the choices.
Draw Area: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the motion
detection. You can draw up to 8 different areas. Click
Stop Drawing to stop drawing motion detection
areas.
The red grids represent the detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
© Copyright 2014 TRENDnet. All Rights Reserved.
Arming Schedule
Edit:
Click Edit to define when you want the motion
detection works.
TV‐IP450P
37