Table of Contents
Advertisement
TRENDnet User's Guide
Fluorescent Lamp:
You can select this mode when there are fluorescent
lamps installed near the speed dome.
Sodium Lamp:
You can select this mode when there are sodium
lamps installed near the speed dome.
Auto‐Track:
White balance is continuously being adjusted in real‐
time according to the color temperature of the
scene illumination.
:
Enable or disable noise reduction.
Digital Noise Reduction
Noise Reduction Level: Adjust the effect of digital
noise reduction. Range: 0‐100%, default : 100%
Zoom Limit
:
You can set Zoom Limit value to limit the maximum
value of zooming. The value can be set to 20, 40, 80,
160 and 320.
HLC: HLC (High Light Compensation) makes the camera
identify and suppress the strong light sources that
usually flare across a scene. This makes it possible to
see the detail of the image that would normally be
hidden.
© Copyright 2014 TRENDnet. All Rights Reserved.
On Screen Display (OSD) Settings
You can display the camera name and the time the video is shooting on the screen.
OSD Display
Display Name:
Check this box to display the product name that was
setup in the device settings (refer to page 25 to
change the device name.)
Display Date:
Check this box to display system time.
Display Week:
Check this box to display time of the week.
Time Format:
Select 12 or 24 hours' time format.
Data Format:
Select different date format.
Display Mode:
Select transparent/flashing format.
OSD Size:
Select different size format. (Auto, 16*16, 32*32,
48*48, 64*64)
Click Save to save the changes
TV‐IP450P
34
Advertisement
Table of Contents
