Set The Allow-To-Dial Code - Pulse GSM Gateway Operation Manual

6.2 4 ports / 8 ports
Sim
Phone
or PBX
※ ※ ※ ※ There are no any different between 1 port、 、 、 、 4 ports and 8 ports, base on
setting.

7. Set the Allow-to-Dial Code

(1)Hold the phone and dial numbers following the order illustrated below:
***#nnnn#: n means the code that allows sending calls out from GSM. Hang up the phone
and the setting is thus completed. When the coding number is altered, follow the above steps
to set up again.
when nnnn is set to
※ ※ ※ ※
Format: ***# [waiting for confirming tone] (turn setting function on)
nnnn# [waiting for echo tone in responding]
Where nnnn means the allow-to-dial prefix code, which as ***#0937, #0948# are on
behave of 0937- and 0948-; the prefix code is dialed out from GSM.
Default setting =0, all call number starting with code "0" means allow-to-dial code.
Local PSTN
＊＊, it will close the calls-sending function from GSM.
＊＊ ＊＊ ＊＊
Operation Manual 7
A
ntenna
Power cord