Setting Of Specific Call-Transfer *Dual Band Only,Tri Band And Sms Version Don't Have This Feature; Pstn To Gsm; Gsm To Pstn - Pulse GSM Gateway Operation Manual

Operation Manual 12
Notice: that this echo function will be halt if there is actual echo sound, reply or voicel response
occurred therein.
Default setting = 02 (forced to dial out through PSTN).
11.Setting of Specific Call-Transfer

(1)PSTN TO GSM

The GSM GATEWAY can receive calls from PSTN and send them out through GSM.
Format: *#** [Waiting for confirming tone]
80nnnn#[Waiting for echo tone in responding]
Where 80 are function codes, nnnn means the call number is to be dialed out.
To cancel this function, press *#**80**#.
Example: *#**800911123456#, represents that PSTN send-in call can be dialed out to

(2)GSM TO PSTN

(2.1)Setup GSM-to-PSTN assigned mode
This machine can receive calls from GSM and dial them out through PSTN.
Format : *#** (Waiting for confirming tone)
Where 81 are function codes, nnnn means the call number is to be dialed out.
To cancel this function, press *#**81**#.
Example: *#**810281112345#, represents that GSM send-in call can be dialed out to
At some circumstances it needs to add "#" in the last digital of PSTN number.
To input it, press "#", and "*" to certify the input.
Example: *#**810423210287*#, it means dialing out phone call to 0423210287#
(2.2)GSM call-Transfer setting time to PSTN auto response
When GSM phone call is dialed out through PSTN, it doesn't have the responding signal in
some practical applications and requires to use this function to auto-respond a few seconds
later.
Format: *#** [Waiting for confirming tone]
*Dual band Only,Tri band and SMS version don't have this feature
0911123456.
81nnnn# [Waiting for echo tone in responding]
0281112345.