Call-Transfer Restriction Setting; Echo Cancel Function - Pulse GSM Gateway Operation Manual

31aabbbbbb#
aa should be 2 digits ranges from 00 to 99 as the short code
bbbbbb : the number to be associated with the short code, max. 15 digits
Notice! : the function cod 99 (reset to factory setting) doesn't affect the short code
number setting.

13. Call-Transfer Restriction Setting

Allow to setup 10 sets of number which are allowed to do call-transfer from mobile to
PSTN. All calls from other numbers will transfer to phone set.
Restrict function setting
Format : *#** (wait for confirming tone)
36aabb#
aa : 01 means no restriction. All calls from mobile will be transferd to PSTN
02 restrict the numbers set by function 37(see as below)
99 clear all the restriction numbers
bb : should be the same as aa
Default setting : 01, all calls will be transferred.
Restrict number setting
Format : *#** (wait for confirming tone)
37aabbbbbb#
aa should be 2 digits ranges from 00 to 09 as restrict code
bbbbbb : the number to be associated with the restrict code, max. 15 digits
!!Note : the function cod 99 (reset to factory setting) doesn't affect the restrict code
number setting

14. Echo Cancel Function

*#**20NNNN#
NNNN= 0101
Echo Cancel Enable
Operation Manual 15