Time Search; Other Operations - FUNAI ZV427FX4 Owner's Manual

Time Search

This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
1) Press [SEARCH] repeatedly so that "TIME SEARCH"
menu appears.
2) Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
TIME SEARCH
2:50
3) Press [E ], [ D] to start time search.
If you want to go in the forward direction, press
[ D].
If you want to go in the reverse direction, press
[E ].
After time search, the unit will play back the cassette
tape automatically.
Note
• Index search and time search are not available
during recording.
• Press [C] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
VCR FUNCTIONS

Other Operations

Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [ D] to fast
forward the cassette tape.
Rewind:
When the unit is in stop mode, press [E ] to rewind the
cassette tape.
To cue or review picture during playback (picture search):
Press [E ], [ D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
Press [F]. Each time you press the button, the picture will
be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [TRACKING K / L]
on remote control.
Counter reset:
Press [CLEAR] to reset the counter to "0:00:00".
To playback in slow motion:
Press [F] during playback, then press [ D].
Press [ D] or [E ] repeatedly to select the desired
speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to its
end, the cassette tape will rewind to the beginning, stop
and eject itself.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select "HIFI".
• If you have connected a monaural TV to this unit, select
"MONO".
Note
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video heads.
• To return to playback from the picture search/still/
slow mode, press [ B].
Your Selection HIFI
L-channel R-channel
Type of recorded tape
non Hi-Fi tapes Monaural Monaural
Hi-Fi tapes
recorded in
L
Hi-Fi stereo
Hi-Fi tapes
Main audio Main audio
recorded main
program program
audio program
Hi-Fi tapes
Second audio Second audio
recorded second
program program
audio program
MONO
Monaural
R L+R
Main audio
program
Second audio
program
EN EN 83