AT&T Small Business System Speakerphone User Manual page 94

Small business system speakerphone with intercom and caller id call waiting
Table of Contents

Advertisement

TELEPHONE OPERATION
PROBLEM
A Repeating Short Ring The extension number you chose is
(Error Ring) Sounds at
All Extensions When
You Assign an
Extension Number
to Your Phone
PROBLEM
Intercom Paging
Signal Not Received
PROBLEM
Cannot Join a
Conversation in
Progress
PROBLEM
Error Tone (Fast
Busy Signal) Heard
When Making a
Page Call
PROBLEM
A Double Beep Sounds
Every 30 Seconds
SOLUTION
already assigned. Begin again and choose
a different extension number from 11 to
26 (see "Assign an Extension Number
to Your Phone" on page 24).
You MUST assign a different extension
number to every phone in your system.
SOLUTION
Make sure you have programmed your
intercom extension number correctly.
Line 1 must be connected at all extensions,
and must be the same telephone number/line
for Page and Intercom to work properly.
SOLUTION
The privacy feature prevents another
set on the system from interrupting
a conversation. Make sure you press the
LINE button to release privacy.
SOLUTION
The Do Not Disturb feature is activated at
the extension you are calling.
SOLUTION
There is a call on hold at this extension.
Press and release the LINE button of the
call to return to the call and turn off the
reminder beep.
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

974

Table of Contents