Table of Contents
Advertisement
<Outside the Range>: When the value of a transaction is beyond a certain range, it will be
marked as an exception. The range need to be defined in the following sub-setting
<Value> and <Value (Upper Limit)>.
NOTE: Transactions will be marked as exceptions in text database only when: (1)
"Exception Strings" and "By Numerals" are set and (2) "Trigger" is <ON>. The data
stored before hand will not be marked as exceptions.
3.7.4 Input Setup
This item is used to configure the connection settings of the POS device.
1. Port Selection
2. Input Source
3. Camera Selection
4. Text Filter
5. Manual Filter Setup
6. Input Process
7. Text Baud Rate
8. Text Bits
9. Text Stop
10. Text Parity
Port Selection
It is essential to select a correct port for the POS device. Meanwhile, make sure the POS
device is connected to the port selected.
Input Source
Select the input source of the POS device, either direct connected or connected with the
Data Converter.
Camera Selection
Select a camera to display the text overlay.
Text Filter
This item is used to choose the text filter. The supported models for pole display and printer
are listed as below.
Pole Display
Cache Technology VFD-202T
Citizen C2202
Digipos CD5220
Emax Pole Display
Input Setup
Printer
Citizen CBM-1000 II
Citizen CT-S300
Dell T200
Epson TM-T88II/TM-T88III/TM-T88IV Samsung ER-655
- 32 -
Serial Port
Direct Connected
1
ASCII
Canonical
9600
8
1
None
POS Machine
Acula AQ-812
IBM SurePOS 700
Samsung ER-380M
Advertisement
Table of Contents
