Table of Contents
Advertisement
3.7.3 Exception Text Setup
This sub-menu is used to define the conditions that are to be treated as an "Exception" and
thus trigger an action (the function will be implemented later).
Exception No.
Trigger
Exception String
By Numerals
Exception No.
Select a number to set the exception parameters. The total is 16 exceptions.
Trigger
Select <ON> to monitor if transactions satisfy exception parameters. Once an exceptions is
found, alarm will be triggered.
Exception String
Users can define Exception String. The "Exception String" is case-sensitive. Only exactly
matched ones will be marked as exceptions.
By Numerals
"Exception String" must be defined before "By Numerals" takes effect. If "By Numerals" is
enabled, only transactions which meet both "Exception String" and "By Numerals" creteria will be
marked as exceptions.
The selections are as the following:
<OFF>: The function is disabled.
<Specific>: When the value of a transaction meets a specific value, it will be marked as an
exception. That specific value need to be defined in the following sub-setting <Value>.
<Greater Equal Than>: When the value of a transaction is greater then or equal to a certain
value, it will be marked as an exception. That specific value need to be defined in the
following sub-setting <Value>.
<Less Equal Than>: When the value of a transaction is less than or equal to a certain value,
it will be marked as an exception. That specific value need to be defined in the following
sub-setting <Value>.
<Inside The Range>: When the value of a transaction is within a certain range, it will be
marked as an exception. The range need to be defined in the following sub-setting
<Value> and <Value (Upper Limit)>.
Exception Text Setup
Value
Value (Upper Limit)
- 31 -
1
ON
NO SALE
OFF
Advertisement
Table of Contents
