Viewing Device Information - Sierra Wireless Clear Spot 4G+ User Manual

Clear Spot 4G+ User Guide
66
To upgrade the device firmware from a file:
1. Log in to the home page.
Disable Wi-Fi when connected via USB
2. Ensure
When Connected Through USB" on page
3. Ensure your device is connected to the power adapter or computer, through
the USB cable.
Advanced settings
4. Click
5. If you want to later confirm that the upgrade was successful, write down the
current version information (shown in
· Software version
· Firmware version (in the 3G section)
· Firmware version (in the 4G section)
Device > Basic
6. Click
7. [OPTIONAL]: Save the current configuration (recommended).
Export
a. Click .
b. Save the file. Note the filename and path.
Browse
8. Click next to the
file to upload to the device.
Update
9. Click .
Please wait while the upgrade occurs; this may take several minutes. The
device LCD shows the upgrade status. The device will restart (possibly sev-
eral times).
Once the upgrade is complete, the LCD device shows the usual icons and text
(for example, the device name).
10. Compare the current version information (in
wrote down in step 5 to confirm that the upgrade was successful.
11. If you've saved the current configuration, reload it.
Browse
a. Click next to the
saved.
Import
b. Click .
12. Reconnect to Wi-Fi. See

Viewing Device Information

1. Log in to the home page.
Advanced settings
2. Click
Device > About
3. Click
Note: 4G information is not available if
Advanced settings > WAN >
( ).
Device > About
.
Update Firmware From File
Import Router Settings
"How Do I Connect to Wi-Fi?" on page
( ).
.
WAN mode
Setup.)
is selected. See "Disabling Wi-Fi
91.
):
field, and click the firmware
Device > About
) to the values you
field, and click the file you've
110.
(WAN mode
is "3G only". is in
2131352