Table of Contents
Advertisement
Section 3M
Viewing Device Information
To view information about your device:
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > About
Note:
4G information is not available if
(
WAN mode
The following information is displayed:
● Manufacturer
●
Model
● Software Version
— Firmware version of the router component of the device.
● Router PRI version
— PRI version of the router component of the device. The PRI (Product Release
Instructions) is a file that contains the settings used to configure wireless products for a particular
service provider, customer, or purpose.
● ESN/MEID
(3G).
The ESN(Electronic Serial Number) is the unique first-generation serial number assigned to the 3G
component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number assigned to
the 3G component of the device.
● PRL version
— The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels/network carrier used by the 3G modem. An updated
PRL may improve your 3G network service.
● Firmware version
— Firmware version of the 3G component of the device.
● PRI version
— PRI version of the 3G component of the device.
● MAC address
— MAC address of the 4G module. Each wireless device has a unique MAC address
(assigned by its manufacturer).
● Firmware version
— Firmware version of the 4G component of the device.
● Activation status
— 3G activated, or not activated.
● Activation date
— Date that the 3G modem/account were first activated.
● Network operator
— The operator (carrier) that your device and account were activated for.
62
Viewing Device Information
button.
.
WAN mode
is in
Advanced Settings > WAN > Setup
is "3G only".
.)
Advertisement
Table of Contents
