Table of Contents
Advertisement
Section 4J
Viewing Device Information
To view information about your device:
1.
Log in to the home page.
2.
Click
Advanced Settings
3.
Click
Device > About
Note:
4G information is not available if
Settings > WAN > Setup
The following information is displayed:
● Model Number
— This is the manufacturer's model of your device.
● Activation Status
— This field reflects whether 3G is activated.
● Manufacturer
— This is the company that made your device.
● Activation Date
— This is the date that the 3G modem was first activated.
● Software Version
— This is the firmware version for the routing hardware of the device.
● Network Operator
— This field shows the carrier that your device was activated with.
● Reconditioned Status
repair and reconditioned (if applicable).
● Wi-Fi Firmware Version
● Reconditioned Date
applicable).
● Router PRI Version
— This is the PRI version for the routing hardware of the device. The PRI (Product
Release Instructions) is a file that contains the settings used to configure wireless products for a
particular service provider, customer, or purpose.
● Total Bytes
— This is the amount of data transferred over the 3G network during the lifetime of the
device.
● MDN
(Mobile Directory Number) — This is a 10-digit phone number.
● ESN
or
MEID
(3G).
The ESN (Electronic Serial Number) is the unique first-generation serial number assigned to the 3G
component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number assigned to
the 3G component of the device.
● PRL Version
— The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem.
● PRI Version
— This is the PRI version of the 3G component of the device.
60
Using Your Device
(
).
.
WAN mode
.)
— This field indicates whether your device has been returned for service or
— This is the firmware version for the Wi-Fi access point of the device.
— This field indicates the date that your device has been reconditioned (if
WAN mode
is "3G only." (
Advanced
is in
Advertisement
Table of Contents
