Cd Player Operation; Opening And Closing The Movable Display; Playback - Alpine CDA-7977 Owner's Manual

CD Player Operation

SOURCE
g DN
Opening and Closing the Movable
display
1
Press the c button.
The movable display will open.
To close the movable display, press the c button
again.
The movable display will close.
NOTES
• Do not apply shock to the movable display when it is
open as it may result in malfunction of the unit.
• The display may be dim during low temperatures and
immediately after turning on the power. The brightness
will return to normal as time elapses.
• The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
16
-EN
-/J
f UP
M.I.X. REPEAT SCAN

Playback

1
Press the c button.
The movable display will open.
Insert a disc with the label side facing up.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will
begin.
When a disc is already inserted, press the
SOURCE button to switch to the CD mode.
The mode will change every time the button is
pressed.
→ TUNER → CD → CD CHANGER∗
(∗ Only when the CD changer is connected)
3
To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
4
To eject the disc, press the c button.
NOTES
• If the CD does not eject, press c button again for
more than 3 seconds with the movable display open.
• Only compact discs containing the mark shown can be
used.
• We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
c