Placing Slim Size Remote Controller - Toshiba P300 User Manual

Slim size remote controller
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Close the cover securely until it clicks.

Placing slim size remote controller

Inserting a slim size remote controller
To insert the slim size remote controller, follow the setps below.
1. Make sure the ExpressCard slot is empty.
2. Set the front side upward and insert the slim size remote controller.
Slim size remote
3. Press gently to ensure a firm connection.
Remove a slim size remote controller
To remove the slim size remote controller, follow the steps below.
1. Press the slim size remote controller slightly to make it stretch out.
2. Grasp the slim size remote controller and pull it out from the slot.
User's Manual
Stopper
controller
Inserting the slim size remote controller
Battery
Removing the batteries
The Grand Tour
2-19