Problem
Some CD/DVDs run
correctly, but others do
not
User's Manual
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of DVD/CD you are using. The
drive supports:
HD DVD-ROM:
■
HD DVD-ROM, HD DVD-R,
■
HD DVD-RW
DVD-ROM:
■
DVD-ROM, DVD-Video,
■
DVD-R, DVD-RW, DVD+R,
■
DVD+RW, DVD-RAM
CD-ROM:
■
CD-DA, CD-Text, Photo CD
(single/multi-session),
■
CD-ROM Mode 1, Mode 2,
■
CD-ROM XA Mode 2 (Form1, Form2),
■
Enhanced CD (CDEXTRA)
Recordable Disk:
■
CD-R, CD-RW, DVD-R,
■
DVD-R(DL), DVD-RW,
■
DVD+R, DVD+R(DL),
■
DVD+RW, DVD-RAM
Check the region code on the DVD. It must match
that on the drive. Region codes are listed in the
Optical Disc Drive
section in Chapter 2,
Grand
Tour.
Troubleshooting
The
9-10