Husqvarna BZ6127TD/968999262 Operator's Manual page 49

5. Front Wheel Mount
Lubricate with a grease gun, one zerk for each
wheel mount, use 10 pumps of the grease gun at
the recommended service intervals. Use only good
quality lithium based grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually maintains
a good quality.
6. Front Wheel Bearings
Lubricate with a grease gun, one zerk for each
set of wheel bearings, 3 to 5 pumps of the grease
gun at the recommended service intervals. Use
only good quality lithium based grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually maintains
a good quality.
7. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and lubricate
with a grease gun, one zerk, until grease is forced
out.
Use only good quality lithium based grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually maintains
a good quality.
IMPORTANT INFORMATION
Be careful and remove excess lubricant so
that it does not come into contact with belts
or belt pulley drive surfaces.
8. Mower Deck Height Adjuster
Lubricate using a grease gun, one zerk, until the
grease squeezes out.
Use only good quality lithium based grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually maintains
a good quality.
LUBRICATION
Lubricating the front wheels
The belt adjuster grease nipple
Lubricating the cutting height adjuster
8011-573
8011-576
8011-574
49