7. Open the fuel switch for the selected fuel tank.
8. Turn the ignition key to the run position to
activate the glow plug. Wait till the light goes
out, then turn key to start position.
IMPORTANT INFORMATION
Wait till the glow plug light goes out or dam-
age could result to the engine.
9. When the engine starts, immediately release
the ignition key back to the run position.
IMPORTANT INFORMATION
To prolong starter life, use short starting
cycles, not to exceed 30 secs./min. Ex-
tended cranking can damage starter motor.
28
OPERATION
Open the fuel switch
Start position
BAM-9
CONSOLE2