Setup & Adjustment; Seat - Husqvarna BZ6127TD/968999262 Operator's Manual

No settings or adjustments are to be
made unless: Engine is stopped, key has
been removed, park brake is on and bat-
tery cable removed from battery.
Setup
Uncrate machine.
Seat Assembly
1. Remove inner seat latch pin `E' ring and slide
pin out to left releasing latch, spring and
washer.
2. Rotate latch so hook will be down and
pointed forward, as shown, when seat is in
upright position. Short legs on latch will be
under seat mounting frame.
3
14
SETUP AND ADJUSTMENTS
WARNING!
1
2
3. Reinstall pin thru latch, spring and washer
with short spring leg up and against inside of
latch.
4. Position long spring leg over top of left side of
seat mounting frame as indicated.
5. Reinstall inner `E' ring.
6. Attach cables to front seat mounting bolts
with loops between washers and mounting
frame as shown.
4
5
1. E-RINGS
2. LATCH
3. PIN
4. LONG SPRING LEG OVER TOP HERE
5. CABLE