GE XL44 JGBS09 Owner's Manual & Installation Instructions page 38

9
LEVELING THE RANGE
1. Install the oven
shelves in the oven
and position the
range where it will
be installed.
2. Check for
levelness by placing a
spirit level or a cup,
partially filled with
water, on one of the
oven shelves. If using
a spirit level, take two
readings—with the
level placed diagonally
first in one direction
and then the other.
3. Remove the
kick panel or
open the broiler
compartment. The
front leveling legs
can be adjusted from
the bottom and the
rear legs can be
adjusted from the
top or bottom.
4. Use an open-end or adjustable wrench to
adjust the leveling legs until the range is level.
5. After the range is level, slide the range
away from the wall so that the Anti-Tip device
can be installed.
38
INSTALLATION INSTRUCTIONS
Raise
range
(on some models)
Lower
range
Leg
leveler
Raise
range
(on some models)
(continued)
Lower
range