HP ProCurve Series 2810 Management And Configuration Manual page 92

Multimedia Traffic Control with IP Multicast (IGMP)
How IGMP Operates
Fast-Leave IGMP
automatically operates
on the ports connected
to IGMP clients 3A and
5A, but does not
operate on the port
connected to Switch 7X
because the switch
detects multiple end
nodes on that port.
Figure 4-3. Example of Automatic Fast-Leave IGMP Criteria
4-16
Automatic Fast-Leave Operation. If a switch port is:
a. Connected to only one end node
b. The end node currently belongs to a multicast group; i.e. is an IGMP
client
c. The end node subsequently leaves the multicast group
Then the switch does not need to wait for the Querier status update interval,
but instead immediately removes the IGMP client from its IGMP table and
ceases transmitting IGMP traffic to the client. (If the switch detects multiple
end nodes on the port, automatic Fast-Leave does not activate—regardless of
whether one or more of these end nodes are IGMP clients.)
In the next figure, automatic Fast-Leave operates on the switch ports for IGMP
clients "3A" and "5A", but not on the switch port for IGMP clients "7A" and 7B,
Server "7C", and printer "7D".
Fast-Leave IGMP
activates on these
two ports.
Routing
Switch
Acting as
Querier
When client "3A" running IGMP is ready to leave the multicast group, it
transmits a Leave Group message. Because the switch knows that there is only
one end node on port A3, it removes the client from its IGMP table and halts
multicast traffic (for that group) to port A3. If the switch is not the Querier, it
does not wait for the actual Querier to verify that there are no other group
members on port A3. If the switch itself is the Querier, it does not query port
A3 for the presence of other group members.
Note that Fast-Leave operation does not distinguish between end nodes on
the same port that belong to different VLANs. Thus, for example, even if all of
the devices on port A6 in figure 4-3 belong to different VLANs, Fast-Leave does
not operate on port A6.
5A
3A
A6
A1 A3 A4
ProCurve Switch with
Automatic Fast-Leave
Server
7B
7A
7C
Switch 7X
Printer
Fast-Leave IGMP does
not activate on this port.
7D