Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Types To Configure QoS for Outbound Traffic
6-64
2.
Change the type configurations by assigning them to a different DSCP
policy, or to an 802.1p priority, or to No-override. For example:
Delete the policy assignment for the device-priority type. (That is,
a.
assign it to No-override.)
b. Create a new DSCP policy to use for re-assigning the remaining types.
Assign the port-priority type to the new DSCP policy.
c.
d. Assign the udp-port 1260 type to an 802.1p priority.
3.
Reconfigure the desired priority for the 000001 codepoint.
ProCurve(config)# qos dscp-map 000001 priority 4
4.
You could now re-assign the types to the original policy codepoint or leave
them as currently configured.