HP ProCurve Series 2810 Management And Configuration Manual page 240

ProCurve Stack Management
Configuring Stack Management
Stack Member List
7-24
To remove a Member from a stack, use the Stack Management screen.
1. From the Main Menu, select:
9. Stacking...
4. Stack Management
You will then see the Stack Management screen:
Figure 7-13. Example of Stack Management Screen with Stack Members Listed
2. Use the downarrow key to select the Member you want to remove from
the stack.
Figure 7-14. Example of Selecting a Member for Removal from the Stack
(for Delete) to remove the selected Member from the stack. You
3. Type [D]
will then see the following prompt:
Figure 7-15. The Prompt for Completing the Deletion of a Member from the Stack
For status descriptions,
see the table on page
7-48.