For example, suppose you wanted to assign these DSCP policies to the packets
identified by the indicated UDP and TDP port applications:
Port Applications
DSCP Policies
DSCP
23-UDP
000111
80-TCP
000101
914-TCP
000010
1001-UDP
000010
1.
Determine whether the DSCPs already have priority assignments, which
could indicate use by existing applications. (Also, a DSCP must have a
priority configured before you can assign any QoS types to use it.)
Figure 6-6. Display the Current DSCP-Map Configuration
Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Types To Configure QoS for Outbound Traffic
Priority
7
5
1
1
The DSCPs for this
example have not yet
been assigned an
802.1p priority level.
6-25