Using The Master Power Key; Clearing The Master Power Key - Universal Electronics Potenza ST User Manual

2. Enter 9 9 5. The last-selected device key
blinks twice.
3. Press POWER once.
4. For the first device you want in the power on
sequence, press a device key (e.g., STB) once.
Then press POWER once. For the second
device in the power sequence, press its key
once (e.g, TV). Then press POWER.
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
a. Press STB once.
b. Press and hold SETUP until the STB key blinks
twice.

Using the Master Power Key

1. After programming, point the remote control
at the devices. Press STB once.
2. Press POWER once to sequentially turn the
programmed home entertainment devices on
or off.
You will see the devices turn on or off according to the
programmed sequence.

Clearing the Master Power Key

1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2. Enter 9 9 5. The last-selected device key
blinks twice.
3. Press and release POWER.
Some features might not be available.
www.urcsupport.com
21