Setting Up A Combo Unit - Universal Electronics Potenza ST User Manual

VCR Code VCR Code
Device Type: Device Type:
DVD Code DVD Code
Device Type: Device Type:
STB Code STB Code
Device Type: Device Type:
STB Code STB Code
Device Type: Device Type:

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/VCR Combo or a
TV/DVD Combo, you need to follow special steps to set
it up. Perform the following instructions to control
combo device:
1. For a TV/VCR Combo, turn on your TV/VCR
Combo and insert a video cassette. (For a TV/
DVD Combo, insert a DVD).
2. On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.
3. Use the "Manufacturer's Codes" at
www.alliancecom.net/pdf/remote_code.pdf to
locate the brand name and enter the first four-
digit code for your combo device (for example,
TV/VCR). If you perform this procedure
correctly, the VCR key will blink twice.
If you don't want to use the Internet to search
for the code, see "Searching For Your Code" on
page 11 for instructions on how to procede.
If the VCR key did not blink twice after
NOTE:
entering the codes last digit, repeat steps 2
Some features might not be available.
www.urcsupport.com
10