Table of Contents
Advertisement
BALAYEUSE À MAIN SANS CORDON
Modèle V1705H
3,6 volts CD
1. Commutateur marche/arrêt
2. Voyant de recharge
3. Plateau à poussière
4. Couvre-brosse transparent
REMARQUE:
Lors de l'envoi, les piles de la balayeuse à
main sans cordon modèle V1705 ne sont pas chargées. Vous
devrez charger les piles pendant 24 heures avant l'usage initial.
Utilisez des piles de rechange XSB705 seulement.
5. Brosse rotative
6. Prise de recharge
7. Manche pivotant
8. Adaptateur de recharge
18
Care and Maintenance
To improve the performance and life of your unit, we recommend you
do the following:
1. Once a month clean the unit with a dry cloth, including the chamber into
which the dust tray fits. Remove any hair, fiber or other materials that
may have built up in the chamber and on the rotating brush.
2. Don't use abrasive materials to clean the hand sweeper. Do not
immerse the unit in water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don't pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Batteries discharged.
2.
No power in electrical
SWEEPER WILL NOT
outlet supplying
OPERATE
transformer.
3.
Unit needs servicing.
1.
Dust tray is full.
SWEEPER WILL NOT
2.
Unit needs recharging.
PICK-UP
3.
Brush bar dirty.
DUST ESCAPING
1.
Dust tray is full.
FROM SWEEPER
2.
Brush bar dirty.
ROTATING BRUSH
1.
Unit clogged.
WILL NOT PICK UP
2.
Dust tray is full.
1.
Electrical outlet not
working
2.
Charging Adapter not
SWEEPER WILL NOT
working
CHARGE
3.
Batteries no longer
functioning
4.
On/Off switch is in the ON
position.
POSSIBLE SOLUTION
1.
Charge unit.
2.
Check fuse or breaker.
Replace fuse/reset breaker.
3.
Call Customer Service.
1.
Empty dust tray.
2.
Charge unit.
3.
Clean brush bar.
1.
Empty dust tray.
2.
Clean brush bar.
1.
Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2.
Empty and clean dust tray.
1.
Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2.
Replace charging adapter
3.
See battery disposal pg. 6.
4.
Depress On/Off switch.
7
Advertisement
Table of Contents
