Desa VRL24NR Owner's Manual page 18

Models CSG3924NT, CSG3924PT,
CSG3924NR and CSG3924PR
1. Place log #1 (ember bed) onto base over
alignment screws to left of front burner
and behind middle burner. Log #1 will sit
on top of front and middle burners (see
Figure 19).
2. Place log #2 to the right of log #1. Log #2
will wrap around right end of rear burner
and sit on log alignment screw (see Figure
20).
3. Place log #3 on left side of base and onto
alignment screw to right of rear burner
(see Figure 20). Log #3 will wrap around
left end of rear burner.
4. Place log #4 onto two alignment screws
to the rear of base (see Figure 21).
5. Place back of log #5 on notch in log #4 (as
shown in Figure 22), across back part of
log #1 and onto pin on log #2 (see Figure
20, page 18 and Figure 22).
6. Place log #6 onto two pins on log #1
(ember bed) and rest back of log #6 on
back log #4 (see Figure 22).
Figure 19 - Installing Log #1 (Ember Bed)
(Model CSG3924NR Shown)
18
INSTALLATION
Continued
Log #5 will seat
in this location
Log #1
www.desatech.com
Log #3
Log #1
Figure 20 - Installing Log #2 (Right) and
Log #3 (Left) (Model CSG3924NR Shown)
Log #3
Log #1
Figure 21 - Installing Log #4 (Model
CSG3924NR Shown)
Log #6
Log #3
Log #1
Figure 22 - Installing Log #5 (Right) and
Log #6 (Left) (Model CSG3924NR Shown)
Log #2
Log #4
Log #2
Log #5
Log #4
Log #2
110021-01S