Procedures To Replace Periodical Maintenance Parts; Fuser Unit And Laser Unit - Brother DCP-8070D Service Manual

1.2

Procedures to Replace Periodical Maintenance Parts

Fuser unit and laser unit

1.2.1
■ CCD model
Note:
• In the case of the assembling and disassembling of the
refer to 4-30
<Uninstalling Procedure>
Check that the following before entering the procedures.
• Make sure that the AC cord is disconnected from the machine.
• Make sure that the Drum/toner ASSY is removed.
• Make sure that the Paper is removed from the Paper tray.
(1) Open the Back cover.
(2) Remove the Arms of the Back cover from the Pins.
Pin
to 4-57.
Arm
CIS
Fig. 4-1
4-3
model,
Pin
Arm
Back cover
Confidential