If You Replace The Main Pcb - Brother DCP-8070D Service Manual

1. IF YOU REPLACE THE MAIN PCB

<What to do when replacing the main PCB>
■ Rewriting the Firmware (Main Firmware, Sub Firmware (PCL/PS))
■ EEPROM Customizing of the Main PCB (Maintenance Mode: Code 74)
■ EEPROM Parameter Initialization of the Main PCB
(Maintenance Mode: Code 01)
■ Operational Check of Control Panel Button (Maintenance Mode: Code 13)
■ Operational Check of Sensors (Maintenance Mode: Code 32)
■ Acquisition of White Level Data and Set the CCD Scanner Area
(Maintenance Mode:Code 55)
■ Setting the Serial Number
■ Setting the Toner Cartridge Type
■ Scanning and Printing Check
■ ROM Version Check (Maintenance Mode: Code 25)
■ Operational Check of Fans (Maintenance Mode: Code 78)
■ Backup to the Main PCB of the Wireless LAN PCB Information
(WLAN model only)
<What you need to prepare>
(1) Computer (Windows
Create a folder on the C drive, for example:- (ALe FIRMWARE)
(2) A USB flash memory drive
(3) The Firmware (Main Firmware/Sub Firmware)
LZXXXX_$.djf or LZXXXX_$.upd
LZXXXX: First six digits are a parts number of the firmware.
$: Alphabet representing the revision of the firmware.
(4) The Maintenance Tool (Mainte.EXE)
Copy it into the folder that has been created on the C drive. Extract the copied file and
run "brmainte.exe" file by double-clicking it.
(5) A USB cable
(6) The Download Utility (FILEDG32.EXE)
Copy it into the folder that has been created in the C drive.
(7) The Brother Maintenance USB Printer Driver
Copy it into the folder that has been created on the C drive and extract the copied file.
®
. XP/2000)
6-1
Confidential