Procedures To Replace Periodical Replacement Parts; Fuser Unit And Laser Unit - Brother DCP-8085DN Service Manual

1.2

Procedures to Replace Periodical Replacement Parts

Fuser unit and laser unit

1.2.1
<Uninstalling Procedure>
Check that the following before entering the procedures.
• Make sure that the AC cord is disconnected from the printer.
• Make sure that the Drum/toner ASSY is removed.
• Make sure that the DX feed ASSY or DX blank cover is removed.
• Make sure that the Paper is removed from the Paper tray.
(1) Open the Back cover.
(2) Remove the Pins of the Outer chute from the Back cover.
Pin
Outer chute ASSY
Back cover
Fig. 4-1
4-3
Pin
Back cover
Confidential