Motor Frame Assy - Brother DCP-8070D Service Manual

9.8.47 Motor Frame ASSY

(1) Remove the three cup S M3x6SR Taptite screws and one cup S M3x10 Taptite screw,
and remove the Motor frame ASSY.
Motor frame ASSY
Taptite cup S M3x6SR
Assembling Note:
• When assembling the Motor frame ASSY, ensure that the gears (indicated with gray)
are placed in the positions as shown in the figure below.
• Check that the "A" part is the upper side of the Exit chute.
<ADF unit gear layout drawing of the old type>
Switch back flap planetary gear
Paper feed planetary gear
<ADF unit gear layout drawing of the new type>
Switch back flap planetary gear
Paper feed planetary gear
Taptite cup S M3x10
Fig. 5-110
Pick up planetary gear
Pick up solenoide ASSY
Pick up planetary gear
Pick up solenoide ASSY
Fig. 5-111
5-104
"A" part of the
Motor frame ASSY
Exit chute
Confidential