Hard Drive - HP Compaq 325 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket, four mounting screws, and the
necessary rubber/foam bumpers.
Description
500-GB, 7200-rpm (replaces 614958-0010
500-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays (replaces
614523-001)
320-GB, 7200-rpm hard drive (replaces 614957-001)
320-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays (replaces
614955-001)
250-GB, 7200-rpm hard drive (replaces 617441-001)
250-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
160-GB, 7200-rpm hard drive
160-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays (replaces
615844-001)
Hard drive hardware kit for use in 39.6-cm (15.6-in) computers (not illustrated). For use with
hard drives not equipped with mounting bracket, retaining screws, and rubber.foam bumpers.
Includes:
Hard drive mounting bracket
Hard drive retaining screw M3×3×4.5 (4)
Rubber bumper, 15×5×3mm (2)
Silicone bumper, 12×5.5×7mm (2)
Hard drive hardware kit for use in 33.8-cm (13.3-in) and 35.6-cm (14.0-in) computers (not
illustrated). For use with hard drives not equipped with mounting bracket, retaining screws, and
rubber.foam bumpers. Includes:
Hard drive mounting bracket
Hard drive retaining screw M3×3×4.5 (4)
Foam bumper, 90×8×0.5mm
Rubber bumper, 13×9.5×73.1m (2)
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
54 Chapter 4 Removal and replacement procedures
Spare part number
608139-001
611029-001
608138-001
611028-001
608137-001
611027-001
652166-001)
614522-001
652169-001
652168-001