Computer Setup In Linux; Starting Computer Setup - HP Compaq 325 Maintenance And Service Manual

Computer Setup in Linux

Starting Computer Setup

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system
is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer or your operating system.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate
and make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
1. Turn on or restart the computer.
2.
Before your operating system opens and while the "F10=ROM Based Setup" message is displayed
in the lower-left corner of the screen, press f10.
118 Chapter 5 Computer Setup