Lap Belt - Kia SOUL Owner's Manual

Safety features of your vehicle
Routing the seat belt webbing through
the rear seat belt guides will help keep
the belts from being trapped behind or
under the seats.
After inserting the seat belt, tighten the
belt webbing by pulling it up.
CAUTION
When using the seat belt, use it
after taking it out of the guides. If
you pull the seat belt when it is
stored in the guides, it may damage
the guides and/or belt webbing.
3 20
OAM032025N
Lap belt (if equipped)
To fasten your seat belt:
To fasten a 2-point static type belt, insert
the metal tab into the locking buckle.
There will be an audible "click" when the
tab locks into the buckle. Check to make
sure the belt is properly locked and that
the belt is not twisted.
Correct
B220A04NF
With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten the
belt and pull on the loose end to tighten.
The belt should be placed as low as pos-
sible on your hips, not on your waist. If
the belt is too high, it could increase the
possibility of your being injured in an
accident.
Too high
Shorten
B220B01NF