Kia SOUL Owner's Manual page 221

■ ■ Bluetooth
®
Wireless
Technology Language Setting
The system language can be changed by
the following steps:
1. Power on the audio system with the
volume set to an audible level.
2. Press and hold button on the
steering wheel until the audio displays
"Please Wait".
®
- The Bluetooth
Wireless Technology
system will reply in currently selected
language that it is changing to the
next language.
- System language cycles between
French/ German/ UK ENGLISH span-
ish/ Dutch/ Italian/ Danish/ Russian/
Polish/ Swedish.
3. When completed, the audio display
returns to normal.
4. Repeat steps 2 and 3 for the next lan-
guage selection.
NOTE:
The phone needs to be paired again
after changing system language.
- Avoid resting your thumb or finger
on the button as the language
could unintentionally change.
■ ■ Voice Recognition Activation
• The voice recognition engine con-
tained in the Bluetooth
Technology System can be activated in
the following conditions:
- Button Activation
The voice recognition system will be
active when the button is pressed
and after the sound of a Beep.
- Active Listening
The voice recognition system will be
active for a period of time when the
Voice Recognition system has asked
for a customer response.
• The system can recognize single digits
from zero to nine whilst number greater
than ten will not be recognized.
• If the command is not recognized, the
system will announce "Pardon" or No
input voice signal from microphone.
(No response)
Features of your vehicle
• The system shall cancel voice recogni-
tion mode in following cases : When
pressing the
®
Wireless
cancel following the beep. When not
making a call and pressing the
button. When voice recognition has
failed 3 consecutive times.
• At any time if you say "help", the sys-
tem will announce what commands are
available.
button and saying
4 133