Kia SOUL Owner's Manual page 223

■ ■ Phone Setup
®
All Bluetooth Wireless Technology-relat-
ed operations can be performed by voice
command or by manual operation.
- By Voice Command:
Press button on the steering wheel
to activate voice recognition.
- By Manual Operation:
1) Push the "SETUP" button to enter
SETUP mode
2) Select "PHONE" item by rotating the
TUNE knob, then push the knob.
3) Select desired item by rotating the
TUNE knob, then push the knob.
• Pairing phone
®
Before using Bluetooth
Technology features, the phone must be
paired (registered) to the audio system.
Up to 5 phones can be paired with the
system.
NOTE:
The pairing procedure of the phone
varies according to each phone model.
Before attempting to pair phone,
please see your phone's User's Guide
for instructions.
NOTE:
Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone is
deleted manually from the audio sys-
tem (refer "Deleting Phone" section)
or the vehicle's information is removed
from the phone.
Features of your vehicle
1. Press button.
2. Say "Set Up".
- The system replies with available
commands.
- To skip the information message,
press again and then a beep is
heard.
3. Say "Pair Phone"
4. Proceed at next step.
5. Say the name of your phone when
Wireless
prompted.
- Use any name to uniquely describe
your phone.
- Use Full name to voice tag.
- Not use to short name or similar to
voice command.
®
6. Bluetooth Wireless Technology sys-
tem will repeat the name you stated.
7. Say "Yes" to confirm.
8. The audio displays "searching ----
passkey: 0000" and asks you to initiate
pairing procedure from the phone.
9. Search the
Technology system on your phone
.Your phone should display your [vehi-
cle model name] on the Bluetooth
Wireless Technology device list. Then
attempt pairing on your phone
®
Bluetooth
Wireless
®
4 135