Manual Heating And Air Conditioning - Kia SOUL Owner's Manual

Manual heating and air condition-
ing
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this case,
the system works sequentially according
to the order of buttons selected.
When pressing any button (or turning
any knob) except AUTO button whilst
automatic operation, the functions not
selected will be controlled automatically.
1. Start the engine.
2. Set the mode to the desired position.
3. Set the temperature control to the
desired position.
4. Set the air intake control to the outside
(fresh) air position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn the
air conditioning system on.
Press the AUTO button in order to con-
vert to full automatic control of the sys-
tem.
■ ■
Type A Type B
Mode selection
The mode selection button controls the
direction of the air flow through the venti-
lation system.
Refer to the illustration in the "Manual cli-
mate control system".
The air flow outlet port is converted as
follows:
Features of your vehicle
Vent mode (B, D)
Air flow is directed toward the upper body
and face. Additionally, each outlet can be
controlled to direct the air discharged
from the outlet.
Vent-Floor mode (B, D, C, E)
Air flow is discharged towards the face
OAM042314
and floor.
Floor-mode (C, E, A, D)
Most of the air flow is directed to the
floor, with a small amount of the air being
directed to the windscreen and side win-
dow defroster.
Floor/Defrost-mode (A, C, E, D)
Most of the air flow is directed to the floor
and the windscreen with a small amount
directed to the side window defrosters.
4 91