Kia SOUL Owner's Manual page 478

Maintenance
❈ ❈ Traffic Change (For Europe)
The low beam light distribution is asym-
metric. If you go abroad to a country with
opposite traffic direction, this asymmetric
part will dazzle oncoming car driver. To
prevent dazzle, ECE regulation demand
several technical solutions (ex. automatic
change system, adhesive sheet, down
aiming). This headlamps are designed
not to dazzle opposite drivers. So, you
need not change your headlamps in a
country with opposite traffic direction.
7 120
Turn signal/position
Position
Turn signal
Front turn signal/position light
Bulb type
Follow the steps 1 to 5 from the previous
page.
6. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
7. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket.
8. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
9. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly and
OAM072073L-1 turning the socket clockwise.
10. Reinstall the light assembly to
the body of the vehicle.
LED type
If the light bulb is not operating, have the
vehicle checked by an authorised Kia
dealer.
OAM072073L