Toshiba RAV-SP1104AT8-E Service Manual page 129

No. Part name
1. Detachment
PMV coil
11
1) Carry out work of item 1 of
2) Turn the coil while pulling upward and then
2. Attachment
1) Surely match the positioning projection of
Fan guard 1. Detachment
12
1) Carry out works of item 1 of
To prevent scratch on the product, carry out
the work on cardboard, cloth, etc.
2) Remove the discharge port cabinet and then
3) Remove the hooking claws (8 positions) of
2. Attachment
1) Push the hooking claws (8 positions) with
Check that all the hooking claws are fixed at
the specified positions.
Procedure
remove the coil from the PMV main unit.
the coil with the concave part of PMV main
unit and then fix it.
REQUIREMENT
put on it so that the fan guard side directs
downward.
the fan guard.
hands from the front side to fix the claws.
REQUIREMENT
Q
.
Positioning projection
Fan guard
Q R
and 1 of .
– 129 –
Remarks
Concave part PMV main unit
PMV coil
Bell mouth Discharge
port cabinet
Hooking claw