Toshiba RAV-SP1104AT8-E Service Manual page 120

No. Part name
1. Detachment
Side cabinet
3
1) Carry out the operation in 1. of
2) Remove the screws fixing the inverter assembly
3) Remove the screws for the side cabinet and the
4) Remove screw for the side cabinet and piping
5) Remove screw for the side cabinet and the
6) Remove screws for the side cabinet, heat
2. Attachment
1) Temporarily suspend the side cabinet on the
2) Mount the removed screws in the opposite
Procedure
and the side cabinet. (ST1T Ø4 × 10, 3 pcs.)
valve fixing plate. (ST1T Ø4 × 10, 2 pcs.)
panel (rear). (Hexagonal screw Ø4 × 10, 2 pcs.)
bottom plate. (Hexagonal screw Ø4 × 10, 1 pc.)
exchanger and the fin guard.
(Hexagonal screw Ø4 × 10, 5 pcs.)
inverter assembly using the hook.
procedure to that during detachment.
Q
above.
– 120 –
Remarks
Discharge port cabinet Side cabinet
Inverter ass'y
Valve fixing plate
Hook
Inverter ass'y
Valve fixing plate