Electrolux T5675 Service Manual page 42

Motor
42
Fasten the belt (B) and the wire (A). Rotate the drum to make sure that the belt is in position.
Tighten the belt tensioner with a torque wrench by pulling the tension plate (E) clockwise until
it is in position.
Check the belt tension with a frequency meater or similar. The frequency shall be 75 Hz ± 5 Hz.
Adjust if necessary.
59
B
E
B
A
fig.7220D
Remount the cover panel and the rear panels.
Note!
The machine will NOT work without the cover panel.